Rotary Retort
A rotary retort for agitated sterilization cycles, documented with a full spec table and real product photography from manufacturing partner ZonGon.
Applications
- — Canned foods where agitation improves heat penetration
- — Products sensitive to overcooking at the can/jar edge
What It Does
Rotates the load during the sterilization cycle to improve and even out heat penetration versus a static retort, running a documented 0.35 MPa / 147°C design cycle.
See It In Operation
Real production-floor footage, not a promotional render.
Additional Views
Stills captured from the same real production footage above.
Process Position
Positioned after filling & sealing, before cooling and case packing, as an alternative to the static water-spray/immersion/steam retorts for products that benefit from agitation.
Key Features
- — 2 documented models (1200/1400) with a full length/volume/power/pressure spec table
- — Design pressure 0.35 MPa, design temperature 147°C
- — Real photography shows the rotating basket/carrier system used to agitate the load
- — 6 further frame sizes (1400x4000 to 1600x5000mm) documented separately from an earlier quotation
Technical Specifications
Evidence tier: technical_spec. Fields without a confirmed source figure show “Configuration available on request” rather than an invented number.
Available Models
2 documented models (1200/1400), full spec table on file; other sizes customizable per the source flyer, and 6 further frame sizes (1400x4000–1600x5000mm) documented separately from an earlier quotation.
Suitable Food Products
Related Equipment
Water Spray Retort Sterilizer
3293x1277x1828mm, 853kg, 240 jars/batch, SS304, CBM 7.9; 12 frame sizes DN600-DN1500 in spec sheet
Water Immersion (Double-Layer Water Bath) Retort
4828x2119x3314mm, 2100kg, ~720 pouches/batch, SS304, CBM 34; 12 frame sizes in spec sheet
Pure Steam Retort
10 frame sizes DN1000-DN1500 in spec sheet, 0.35MPa/147C
Related Solutions
Frequently Asked Questions
Why choose rotary over a static retort?
Agitation during the cycle can improve and even out heat penetration and can reduce process time for products that tolerate movement — talk to our engineers about whether your product is a fit.
Request a Solution
Tell us your product, target capacity and packaging format — we'll come back with a configuration.